Rapidia Conflux 1 System (Complete)
High-efficiency sintering furnace has low sintering gas and electricity use. Sinters with standard argon gas, while achieving excellent metallurgy exceeding MIM standards.
Make metal parts wherever you need them.
Scalable Industrial Additive Manufacturing with the Rapidia Conflux 1 System. Just add more printers!
Pair multiple printers with each furnace while maintaining full productivity.
- 62 kWh AV. FOR 316l RAPID CYCLE
- 400-450L AV. GAS USAGE
- 92 kWh AV. FOR 316l EXTENDED CYCLE
- 750-850L AV. GAS USAGE
The Rapidia Conflux1 is an easy-to-use, fast, and affordable end-to-end metal additive manufacturing solution.
Powered by Metal Paste Deposition
Our powder-free metal 3D printing process can scale from lab-based rapid prototyping into an affordable, small-scale production solution.
Conflux 1 makes functional metal parts way faster.
Most parts are finished in less than half the time it takes to make functional parts with metal filament.
Get functional parts in under 24 hours.
Conflux 1 makes metal 3D printing safer.
Metal that is safely bound in a paste feedstock. No chemical solvents or loose powder, no VOCS.
Make metal parts wherever you need them.
Conflux 1 makes printing metal more affordable.
Rapidia’s system has among the lowest operating costs of any metal additive manufacturing system.
Keep low-volume part production lean and agile.
Printer to Sinter
A complete metal additive manufacturing solution
Ready to go without the need for a dedicated operator and no additional equipment for powder handling, stress relieving, support removal or furnace chilling.
Dual Extruder
Independent Dual Extruders allow Conflux 1 to print two materials in the same print. Using our Evaporative Support material in one extruder allows printing of any shape, any overhang.
Sealed Feedstock
Quick and easy materials changes. Feedstock cartridges can be stored at any fill level. Stainless steel feedstock containers are reused through our cartridge exchange program.
Easy Calibration
Rapidia Print is our print management software. It provides built-in extrusion calibration, extruder alignment, and print monitoring.
Rapidia Conflux 1 is an Open Platform
Prepare prints with your preferred slicer or use Rapidia Cura with added support generation tools. Slicing profiles are tuned for optimal results on Conflux 1, but all settings remain unlocked to give users full control.
Users may also create custom Conflux 1 Furnace cycles for vacuum heat treating, vacuum brazing, or specific sintering needs.
Reviews
There are no reviews yet.